鋼-鋁固液相浸鍍復合板的軋制處理

<listing id="l9bhj"><var id="l9bhj"></var></listing>

<var id="l9bhj"><strike id="l9bhj"></strike></var>

<menuitem id="l9bhj"></menuitem>

<var id="l9bhj"></var><cite id="l9bhj"><video id="l9bhj"></video></cite>

<menuitem id="l9bhj"></menuitem>

<cite id="l9bhj"><strike id="l9bhj"><listing id="l9bhj"></listing></strike></cite><cite id="l9bhj"><span id="l9bhj"><menuitem id="l9bhj"></menuitem></span></cite>

<var id="l9bhj"></var>

<var id="l9bhj"></var>

<var id="l9bhj"></var>

留言板

尊敬的讀者、作者、審稿人, 關于本刊的投稿、審稿、編輯和出版的任何問題, 您可以本頁添加留言。我們將盡快給您答復。謝謝您的支持!

姓名
郵箱
手機號碼
標題
留言內容
驗證碼

鋼-鋁固液相浸鍍復合板的軋制處理

張鵬, 杜云慧, 任學平, 康永林, 劉漢武, 崔建忠, 巴立民

文章導航 > 工程科學學報 > 1999 > 21(2): 179-181

張鵬, 杜云慧, 任學平, 康永林, 劉漢武, 崔建忠, 巴立民. 鋼-鋁固液相浸鍍復合板的軋制處理[J]. 工程科學學報, 1999, 21(2): 179-181. doi: 10.13374/j.issn1001-053x.1999.02.051

引用本文:

張鵬, 杜云慧, 任學平, 康永林, 劉漢武, 崔建忠, 巴立民. 鋼-鋁固液相浸鍍復合板的軋制處理[J]. 工程科學學報, 1999, 21(2): 179-181. doi: 10.13374/j.issn1001-053x.1999.02.051

Zhang Peng, Du Yunhui, Ren Xueping, Kang Yonglin, Liu Hanwu, Cui Jianzhong, Ba Limin. Rolling on Steel-Aluminum Solid to Liquid Immersing Bonding Plate[J]. Chinese Journal of Engineering, 1999, 21(2): 179-181. doi: 10.13374/j.issn1001-053x.1999.02.051

Citation:

Zhang Peng, Du Yunhui, Ren Xueping, Kang Yonglin, Liu Hanwu, Cui Jianzhong, Ba Limin. Rolling on Steel-Aluminum Solid to Liquid Immersing Bonding Plate[J]. Chinese Journal of Engineering, 1999, 21(2): 179-181. doi: 10.13374/j.issn1001-053x.1999.02.051

張鵬, 杜云慧, 任學平, 康永林, 劉漢武, 崔建忠, 巴立民. 鋼-鋁固液相浸鍍復合板的軋制處理[J]. 工程科學學報, 1999, 21(2): 179-181. doi: 10.13374/j.issn1001-053x.1999.02.051

引用本文:

張鵬, 杜云慧, 任學平, 康永林, 劉漢武, 崔建忠, 巴立民. 鋼-鋁固液相浸鍍復合板的軋制處理[J]. 工程科學學報, 1999, 21(2): 179-181. doi: 10.13374/j.issn1001-053x.1999.02.051

Zhang Peng, Du Yunhui, Ren Xueping, Kang Yonglin, Liu Hanwu, Cui Jianzhong, Ba Limin. Rolling on Steel-Aluminum Solid to Liquid Immersing Bonding Plate[J]. Chinese Journal of Engineering, 1999, 21(2): 179-181. doi: 10.13374/j.issn1001-053x.1999.02.051

Citation:

Zhang Peng, Du Yunhui, Ren Xueping, Kang Yonglin, Liu Hanwu, Cui Jianzhong, Ba Limin. Rolling on Steel-Aluminum Solid to Liquid Immersing Bonding Plate[J]. Chinese Journal of Engineering, 1999, 21(2): 179-181. doi: 10.13374/j.issn1001-053x.1999.02.051

鋼-鋁固液相浸鍍復合板的軋制處理

doi: 10.13374/j.issn1001-053x.1999.02.051

1. 北京科技大學材料科學與工程學院, 北京 100083;
2. 東北大學壓力加工系, 沈陽 110006;
3. 鞍山汽車配件廠, 鞍山 114014

基金項目:

國家"863"工程重點資助(No.863-715-009-060)

作者簡介:
張鵬男,31歲,博士后

中圖分類號: TG335.22
計量
- 文章訪問數: 239
- HTML全文瀏覽量: 99
- PDF下載量: 6
- 被引次數: 0
出版歷程
- 收稿日期: 1998-06-12
- 網絡出版日期: 2021-08-27

Rolling on Steel-Aluminum Solid to Liquid Immersing Bonding Plate

1. Material Science and Engineering School, UST Beijing, Beijing 100083, China;
2. Metal Forming Department, Northeastern University, Snenyang 110006;
3. Anshan Automobile Fittin

摘要: 研究了軋制處理后鋼-鋁固液相浸鍍復合板的界面剪切力學性能,確定了壓下率與界面剪切強度之間的關系.結果表明:壓下率為2.73%時,可消除由1.2mm厚08Al鋼板和1.0mm厚工業純鋁構成的2.2mm厚鋼-鋁固液相浸鍍復合板的界面附加應力,從而獲得最大界面剪切強度為83.5MPa.
- 軋制 /
- 固液相浸鍍復合板 /
- 界面附加應力
Abstract: The interfacial shear property of steel-aluminum solid to liquid immersing bonding plate after being rolled was studied and the relationship between interfacial shear strength and relative reduction was determined.The result proved that:for the bonding plate made up with 1.2mm-thick 08Al steel plate and 1.0 mm-thick aluminum layer, when the relative reduction was 2.73%,the interfacial subsidiary stress could be eliminated and thus the maximum interfacial shear strength 83.5MPa was obtained.
- rolling /
- solid to liquid immersing bonding plate /
- interfacial subsidiary stress

參考文獻(0)

資源附件(0)

WeChat

點擊查看大圖

計量

文章訪問數: 239
HTML全文瀏覽量: 99
PDF下載量: 6
被引次數: 0

/

下載: 全尺寸圖片幻燈片

分享

用微信掃碼二維碼

分享至好友和朋友圈

返回