FGH95與Rene'95合金粉末熱學凝固參數和微觀組織

<listing id="l9bhj"><var id="l9bhj"></var></listing>

<var id="l9bhj"><strike id="l9bhj"></strike></var>

<menuitem id="l9bhj"></menuitem>

<var id="l9bhj"></var><cite id="l9bhj"><video id="l9bhj"></video></cite>

<menuitem id="l9bhj"></menuitem>

<cite id="l9bhj"><strike id="l9bhj"><listing id="l9bhj"></listing></strike></cite><cite id="l9bhj"><span id="l9bhj"><menuitem id="l9bhj"></menuitem></span></cite>

<var id="l9bhj"></var>

<var id="l9bhj"></var>

<var id="l9bhj"></var>

留言板

尊敬的讀者、作者、審稿人, 關于本刊的投稿、審稿、編輯和出版的任何問題, 您可以本頁添加留言。我們將盡快給您答復。謝謝您的支持!

姓名
郵箱
手機號碼
標題
留言內容
驗證碼

FGH95與Rene'95合金粉末熱學凝固參數和微觀組織

李慧英, 胡本芙, 章守華

文章導航 > 工程科學學報 > 1987 > 9(S1): 1-11

李慧英, 胡本芙, 章守華. FGH95與Rene'95合金粉末熱學凝固參數和微觀組織[J]. 工程科學學報, 1987, 9(S1): 1-11. doi: 10.13374/j.issn1001-053x.1987.s1.002

引用本文:

李慧英, 胡本芙, 章守華. FGH95與Rene'95合金粉末熱學凝固參數和微觀組織[J]. 工程科學學報, 1987, 9(S1): 1-11. doi: 10.13374/j.issn1001-053x.1987.s1.002

Li Huiying, Hu Benfu, Zhang Shouhua. Comparison of Microstructures and Calculated Solidification Parameters Between FGH95 and Rene' 95 Superalloy Powders[J]. Chinese Journal of Engineering, 1987, 9(S1): 1-11. doi: 10.13374/j.issn1001-053x.1987.s1.002

Citation:

Li Huiying, Hu Benfu, Zhang Shouhua. Comparison of Microstructures and Calculated Solidification Parameters Between FGH95 and Rene' 95 Superalloy Powders[J]. Chinese Journal of Engineering, 1987, 9(S1): 1-11. doi: 10.13374/j.issn1001-053x.1987.s1.002

李慧英, 胡本芙, 章守華. FGH95與Rene'95合金粉末熱學凝固參數和微觀組織[J]. 工程科學學報, 1987, 9(S1): 1-11. doi: 10.13374/j.issn1001-053x.1987.s1.002

引用本文:

李慧英, 胡本芙, 章守華. FGH95與Rene'95合金粉末熱學凝固參數和微觀組織[J]. 工程科學學報, 1987, 9(S1): 1-11. doi: 10.13374/j.issn1001-053x.1987.s1.002

Li Huiying, Hu Benfu, Zhang Shouhua. Comparison of Microstructures and Calculated Solidification Parameters Between FGH95 and Rene' 95 Superalloy Powders[J]. Chinese Journal of Engineering, 1987, 9(S1): 1-11. doi: 10.13374/j.issn1001-053x.1987.s1.002

Citation:

Li Huiying, Hu Benfu, Zhang Shouhua. Comparison of Microstructures and Calculated Solidification Parameters Between FGH95 and Rene' 95 Superalloy Powders[J]. Chinese Journal of Engineering, 1987, 9(S1): 1-11. doi: 10.13374/j.issn1001-053x.1987.s1.002

FGH95與Rene'95合金粉末熱學凝固參數和微觀組織

doi: 10.13374/j.issn1001-053x.1987.s1.002

金相教研室

計量
- 文章訪問數: 252
- HTML全文瀏覽量: 76
- PDF下載量: 9
- 被引次數: 0
出版歷程
- 網絡出版日期: 2021-10-28
- 刊出日期: 2021-10-28

Comparison of Microstructures and Calculated Solidification Parameters Between FGH95 and Rene' 95 Superalloy Powders

摘要: 大量實驗證明,鑄態組織中二次枝晶臂距主要受冷卻速度或凝固時間的影響。本文對FGH95和Rene’95氬氣霧化的、不同粒度級的粉末顆粒測定了二次枝晶臂距,計算了冷卻速度Ṫ、完成凝的固時間tf、凝固速度R及固—液界面前沿溫度梯度G。結果表明:兩種粉末粒度在-60—+320目范圍內冷卻速度為10³-10⁴℃/s,凝固時間為10^-1—10^-2s。隨著粉末顆粒減小,冷卻速度增加,G/R值增大,粉末顆粒的凝固從以樹枝晶為主的方式逐漸轉變成以胞狀晶為主的方式,用G/R值來判斷凝固組織中的碳化物形態不是唯一因素。

Abstract: Dendritic arms spacings of FGH95 and Rene'95 atomized powder for different mesh size were measured. Cooling rate (Ṫ) > local solidification time(t_f), thermal gradient (G), and growth rate (R) were calculated.It is shown that as local solidification time is 10^-1-10^-2s,cooling rate of two powders inside the range of -60-+320 mesh is 103-104℃/s.The cooling rate and O/R ratio inerease with decreasing particle size and dendrite structure of powder particle correspondly changes into cellular structure.It seems that the morphology of MC carbibe in powder particle does not depend only on O/R ratio.

參考文獻(0)

資源附件(0)

WeChat

點擊查看大圖

計量

文章訪問數: 252
HTML全文瀏覽量: 76
PDF下載量: 9
被引次數: 0

/

下載: 全尺寸圖片幻燈片

分享

用微信掃碼二維碼

分享至好友和朋友圈

返回